Revision as of 15:07, 12 January 2022 by Milanv (talk | contribs) (ginstr IIoT Swisscom LPN LoRaWAN Configuration)
Jump to: navigation, search

ginstr IIoT

ginstr IIoT firmware parameter documentation

ginstr IIoT Android class parameter documentation

ginstr IIoT config file XML structure description

ginstr IIoT wishlist

ginstr IIoT tables in ginstr web

ginstr IIoT project links

ginstr IIoT features per device use-case

ginstr IIoT firmware coding instructions

SwisscomLPN LoRaWAN Configuration

This manual will describe the configuration steps for setup the Swisscom LoRaWAN network. Test was done on **Heltec WiFi LoRa 32 (V2)** board.

1. Login to Swisscom LPN portal

Open the following link in the browser: Enter the following credentials:

Password: BTG9Lfvm$1

2. Open Interop Device Manager

Open the Interop Device Manager by selecting it from DropDown Menu (see picture below). SwisscomLPNInteropDeviceManager.png

3. Create New Device

Click on Create


4. Configure Device Parameters

Fill in the new Device parameters. See the picture below as an example of one device configuration.


5. Update the Device firmware to match the OTAA parameters from Portal

Open the LMIC-node-heltec example. Edit the keyfiles/lorawan-keys.h file with the parameters from the portal. NOTE: OTAA_DEVEUI and OTAA_APPEUI are in LSB format while OTAA_APPKEY is in MSB format

#pragma once


// Keys required for OTAA activation:

// End-device Identifier (u1_t[8]) in lsb format
#define OTAA_DEVEUI 0x08, 0x07, 0x66, 0x05, 0x44, 0x33, 0x22, 0x11

// Application Identifier (u1_t[8]) in lsb format
#define OTAA_APPEUI 0x88, 0x77, 0x66, 0x55, 0x04, 0x03, 0x02, 0x01

// Application Key (u1_t[16]) in msb format
#define OTAA_APPKEY 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xB1, 0xB2 ,0xB3 ,0xB4 ,0xB5 ,0xB6 ,0xB7, 0xB8

Pages in category "ginstr IIoT"

This category contains only the following page.